Zinc Cut wire Shots are soft abrasives (hardness as low as 20-80 HRB) with higher density. Orishots zinc cut wire shots leaves a very fine film layer on work objects, zinc element provides additional corrosion resistance.

Zinc cut wire shots

Applications

De-burring aluminum die castings (removing flash upto .020″), stripping paint and removing powder coatings without damaging substrates (tooling, paint hooks, etc.).

Specs

Very low hardness of 20-80 HRB. By leaving a very fine film layer on work objects, zinc provides additional corrosion resistance

SPECIFICATIONS

Sizes                                : .012″ – .137″ (0.30mm – 3.5mm)

Wire                                 : Commercial Quality Pure Zinc Special High Grade Zinc (99.99%)

Hardness Scale             : 20 – 80HV

Density                            : 7.14 gm/cm3

Tensile Strength            : 11 Kg/mm2 (Min)